admin – Page 11 – BS Scientifics

02MayMay 2, 2021

Auto-Ignition Point Tester LB-10AIP

Auto-Ignition Point Tester LB-10AIP

Auto-ignition point tester LB-10AIP is a microprocessor controlled unit. It is characterized with Al artificial intelligence algorithm for temperature control. The spontaneous ignition enables point testing of nonflammable fuels.

Specification

Temperature range	RT ~ 800 °C
Temperature accuracy	≤ 1 °C
Conical flask capacity	200 mL
Generator turbine speed	> 30 MW
Ambient temperature	RT ~ 50 °C
Relative humidity	< 80 %
Power consumption	< 2000 W
Power supply	AC 220 V ± 10 %; 50 Hz
Dimensions	680 × 520 × 500 mm
Weight	40 kgs

Features

Digital LCD screen enables visual monitoring of delivered data
Intelligent temperature regulation and control technology
Temperature stability throughout the chamber

Application

Used in determining the ignition point of nonflammable oils like lubricants, thermic fluids, hydraulic fluids, etc.

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

Ash Content Tester LB-10ACT

Ash Content Tester LB-10ACT

Ash content tester LB-10ACT is a microprocessor-controlled unit with thermocouple temperature control element. Conforming to ASTM D482 Standard Test Method, it is characterized with box-type resistance furnace and electric hot plates as a heating source.

Specification

Temperature range	RT ~ 1000 °C
Air furnace heating time	≤ 60 min
Temperature uniformity	≤ 15 °C
Temperature control	775 °C ± 25 °C
Heating power	2500 W
Power supply	AC 220 V ± 10 %; 50 Hz
Heating chamber dimensions	200 × 120 × 80 mm
Dimensions	750 X 550 X 650 mm
Weight	45 kgs

Features

Digital LED screen for visual monitoring of set data
Highly proficient refractories and heater parts
Digital temperature controller
Instant heating
Cast iron top heating plate
Stainless steel tank shell

Application

Used in determining the ash content in petroleum products in the fields of natural gasoline, crude oil extraction, petrochemicals, power stations, etc.

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

Aniline Point Tester LB-10APT

Aniline Point Tester LB-10APT

Aniline point tester LB-10APT is a microprocessor-controlled unit designed under the ASTM D611 Standard. It is characterized by electric stirring for maintaining temperature equilibrium throughout the sample. The front panel consists of knobs for temperature and speed regulation.

Specification

Temperature range	RT ~ 200 °C
Temperature accuracy	≤ ± 0.5 °C
Heating power	800 W
Motor power	6 W
Power supply	AC 220 V; 50 Hz
Dimensions	380 × 350 × 480 mm
Weight	35 kgs

Features

Analogue display for visually assessing the set data
Electronic stirring for speed regulation
Automatic end point detection
Manual temperature control
Transparent cylinder for visual monitoring of the analyzing process

Application

Used in determining the aniline point of petroleum products and hydrocarbon solvents in the fields of petrochemicals, organic chemical industries, solvents, power stations, etc.

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

XRF Alloy Analyzer LB-66AL

XRF Alloy Analyzer LB-66AL

XRF alloy analyzer LB-66AL is a handheld analyzer designed for analysis of the elemental composition of alloys. It determines the chemistry of a sample by measuring the fluorescent X-rays emitted when excited by a primary-ray source. The built-in library of 380 alloy types facilitates analysis of a wide range of alloy materials. Configured with SDD detector enabling high accuracy elemental analysis.

Specification

Detector	SDD detector
Detection range ( ppm )	Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Sn, Sb, Hf, Ta, W, Re, Pb and Bi
Excitation source ( standard )	50 kV / 200 µA Ag target
Operating temperature	( -20 °C to 50 °C )
Operating humidity	≤ 90 %
Pipe flow pressure	Adjustable
Digital pulse processor	80 MHz ADC digital pulse processor
Heat dissipation system	T-shaped radiator
Display panel	4.3 inch industrial resistive touch screen
Display brightness	Automated adjustment
Memory capacity	32 GB
Data storage	32 GB, 300,000 spectral data
Battery life	8 hours
Dimensions ( W x H x D )	79 x 280 x 254 mm
Weight ( with battery )	1.6 kgs

Features

Non-destructive, rapid analysis of alloy elements
On site alloy grade identification
Built-in double beam technology for auto detection of sample front
Wide range alloy analysis ( 30 standard elements )
Analysis of small diameter samples ( ppm range )
Detection of high temperature alloys ( molybdenum tungsten alloys )
Real-time battery monitoring ( M-bus battery )
50 kV / 200 µA Au, W, Rh target excitation source ( optional )
USB, Bluetooth and WiFi compatible
Data exportable to EXCEL or PDF format

Application

Used in petrochemical industry, thermal power plant, nuclear power plant, hydroelectric power plant, metals and mining industries for alloy grade identification and analysis

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

XRF Alloy Analyzer LB-65AL

XRF Alloy Analyzer LB-65AL

XRF alloy analyzer LB-65AL is a handheld analyzer designed for analysis of the elemental composition of alloys. It determines the chemistry of a sample by measuring the fluorescent X-rays emitted when excited by a primary-ray source. The built-in library of 380 alloy types facilitates analysis of a wide range of alloy materials. Configured with BOOST Si-pin detector enabling high accuracy elemental analysis.

Specification

Detector	BOOST Si-pin detector
Detection range ( ppm )	Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Sn, Sb, Hf, Ta, W, Re, Pb and Bi
Excitation source ( standard )	50 kV / 200 µA Ag target
Operating temperature	( -20 °C to 50 °C )
Operating humidity	≤ 90 %
Pipe flow pressure	Adjustable
Digital pulse processor	80 MHz ADC digital pulse processor
Heat dissipation system	T-shaped radiator
Display panel	4.3 inch industrial resistive touch screen
Display brightness	Automated adjustment
Memory capacity	32 GB
Data storage	32 GB, 300,000 spectral data
Battery life	8 hours
Dimensions ( W x H x D )	79 x 280 x 254 mm
Weight ( with battery )	1.6 kgs

Features

Non-destructive, rapid analysis of alloy elements
On site alloy grade identification
Built-in double beam technology for auto detection of sample front
Wide range alloy analysis ( 25 standard elements )
Analysis of small diameter samples ( ppm range )
Detection of high temperature alloys ( molybdenum tungsten alloys )
Real-time battery monitoring ( M-bus battery )
50 kV / 200 µA Au, W, Rh target excitation source ( optional )
USB, Bluetooth and WiFi compatible
Data exportable to EXCEL or PDF format

Application

Used in petrochemical industry, thermal power plant, nuclear power plant, hydroelectric power plant, metals and mining industries for alloy grade identification and analysis

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

SAS Duo Super 360 LB-20SAS

SAS Duo Super 360 LB-20SAS

SAS duo super 360 LB-20SAS is a portable unit that allows testing of two different media in one cycle. Two sampling heads operate simultaneously decreasing the sampling time up to 70 %. LCD illuminated touch screen command panel displays continuous sampling parameters. It is used to capture microorganisms when environment contamination is too low and number of samples to be tested is too high.

Specification

Airflow rate	181 l / min
Sampling head	Aluminium, stainless steel or plastic (certified ready to use)
Dimension	260 × 110 × 352 mm
Weight	2.2 kgs

Features

Data management of different implemented sampling programs
Data storage (non-modifiable excel format)
Infrared transfer of data to any remote PC
Easy control of the calibration system without opening the instrument
Reduces operators time by monitoring 1000L of air in less than 3 minutes
Avoids turbulence in unidirectional airflow
Prevents re-aspiration of sampled air
Allows testing of two different media in one sampling cycle
Monitors 360 l / min of air in cleanrooms
Provides quick and consistent results

Application

Used for controlling and validating biotechnology and microbiology laboratories, clinics, hospitals, restricted access barriers (RABS), vaccine production plants, operating theatres, etc.

Optional Accessories

Accessory No.	Accessories
SASB1	Battery charger with universal plug for both models (this is mandatory for the correct functioning of the instrument)
SASB2	Soft carrying case
SASB3	Aluminium carrying case
SASB4	SAS-Holder table and wall (stainless steel)
SASB5	Stainless steel floor tripod
SASB6	Adapter to convert contact plate model to accept 90 mm Petri dishes
SASB7	SAS stainless steel Petri head + aluminium adapter
SASB8	SAS aluminium Petri head + adapter
SASB9	IO OQ PQ manual
SASB10	Software for downloading data
SASB11	Interface for SAS software
SASB12	Infrared remote control

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

SAS Super Air Sampler LB-11SAS

SAS Super Air Sampler LB-11SAS

SAS super air sampler LB-11SAS is a portable unit with eight pre-fixed sampling configuration. It allows continuous or sequential sampling from few minutes to several hours. LCD illuminated touch screen command panel displays continuous sampling parameters. It is used for inspecting the indoor environment by capturing the microorganisms present in the air.

Specification

Airflow rate	180 l / min
Sampling time	6 mins (1000 L)
Maximum sampling quantity	70000 L
Battery life	40000 l
Power	8.4 V ⁓ 2.7 A h
Dimension	120 × 125 × 275 mm
Weight	1.8 kgs

Features

Data management of different implemented sampling programs
Data storage (non-modifiable excel format)
Infrared transfer of data to any remote PC
Maximum storage up to 300 sampling cycles
Avoids turbulence in unidirectional airflow
Prevents re-aspiration of sampled air
Speed sensors accurately maintain sampling rate
Automatic signals indication (expired calibration)
Choice of sampling head (Aluminium / stainless steel / plastic)
Pyramid shaped body for stability

Application

Used for controlling and validating biotechnology and microbiology laboratories, clinics, hospitals, restricted access barriers (RABS), vaccine production plants, operating theatres, etc.

Optional Accessories

Accessory No.	Accessories
SASA1	Battery charger with universal plug for both models (this is mandatory for the correct functioning of the instrument)
SASA2	Soft carrying case
SASA3	Bio-Transport autoclavable carrying case
SASA4	Handle for Bio-Transport carrying case
SASA5	Aluminium carrying case
SASA6	SAS-Holder table and wall (stainless steel)
SASA7	Stainless steel floor tripod
SASA8	Adapter to convert contact plate model to accept 90 mm Petri dishes
SASA9	SAS stainless steel Petri head + aluminium adapter
SASA10	SAS aluminium Petri head + adapter
SASA11	IO OQ PQ manual
SASA12	Software for downloading data
SASA13	Interface for SAS software
SASA14	Infrared remote control

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

Air Release Value Tester LB-11ARV

Air Release Value Tester LB-11ARV

Air release value tester LB-11ARV is a compact unit, with automatic air flow control equipment. Microprocessor based control system, calculates the target density of test sample for measuring air release value. The unit conforms to ASTM D3427 standard test method for air release properties of petroleum oils.

Specification

Temperature range	Ambient ~ 100 °C
Circulating mode	Pump circulation
Accuracy	± 0.1 °C
Senor	pt100 (platinum resistor)
Compliance	ASTM D3427
Ambient temperature	10 °C ~ 40 °C
Ambient humidity	≤ 85 %
Power	600 W
Voltage	AC 220 V ±, 50 Hz

Features

Large pressure gauge dial (easy reading)
Test timer for aeration timing
Automatic function of aeration direction switch
Built-in air heater (safe and rapid)

Application

Used to test the ability of a turbine, hydraulic, and gear oils to separate entrained air in petroleum, oil, chemical industries for analysis, classification and safety regulations

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

SAS Super Air Sampler LB-10SAS

SAS Super Air Sampler LB-10SAS

SAS super air sampler LB-10SAS is a portable unit with eight pre-fixed sampling configuration. It allows continuous or sequential sampling from few minutes to several hours. LCD illuminated touch screen command panel displays continuous sampling parameters. It is used for inspecting the indoor environment by capturing the microorganisms present in the air.

Specification

Airflow rate	100 l / min
Sampling time	10 mins (1000 L)
Maximum sampling quantity	70000 L
Battery life	70000 l
Power	8.4 V ⁓ 2.7 A h
Dimension	120 × 125 × 275 mm
Weight	1.8 kgs

Features

Data management of different implemented sampling programs
Data storage (non-modifiable excel format)
Infrared transfer of data to any remote PC
Maximum storage up to 300 sampling cycles
Avoids turbulence in unidirectional airflow
Prevents re-aspiration of sampled air
Speed sensors accurately maintain sampling rate
Automatic signals indication (expired calibration)
Choice of sampling head (Aluminium / stainless steel / plastic)
Pyramid shaped body for stability

Application

Used for controlling and validating biotechnology and microbiology laboratories, clinics, hospitals, restricted access barriers (RABS), vaccine production plants, operating theatres, etc.

Optional Accessories

Accessory No.	Accessories
SASA1	Battery charger with universal plug for both models (this is mandatory for the correct functioning of the instrument)
SASA2	Soft carrying case
SASA3	Bio-Transport autoclavable carrying case
SASA4	Handle for Bio-Transport carrying case
SASA5	Aluminium carrying case
SASA6	SAS-Holder table and wall (stainless steel)
SASA7	Stainless steel floor tripod
SASA8	Adapter to convert contact plate model to accept 90 mm Petri dishes
SASA9	SAS stainless steel Petri head + aluminium adapter
SASA10	SAS aluminium Petri head + adapter
SASA11	IO OQ PQ manual
SASA12	Software for downloading data
SASA13	Interface for SAS software
SASA14	Infrared remote control

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

Air Release Value Tester LB-10ARV

Air Release Value Tester LB-10ARV

Air release value tester LB-10ARV is a microprocessor-controlled unit with an integrated monitoring system designed under ASTM D3427 standard. Its characteristic entrained air release value is determined by the effect of heat resistant tubes along with water and air baths.

Specification

Water bath temperature range	RT ~ 100 °C
Air bath temperature range	RT ~ 90 °C
Water bath temperature control accuracy	± 0.1 °C
Air bath temperature accuracy	≤ ± 5 °C
Bath capacity	5 L
Power supply	AC 220 V ± 10 %; 50 Hz
Dimensions	650 × 450 × 650 mm
Weight	35 kgs

Features

Digital LED screen for visual monitoring
Operational accessibility by control knob
Automatic temperature control
Circulated heating process
Quick connectors for ease of sample handling

Application

Used in determining the entrained air release value in hydraulic fluids, lubricating oils, in the fields of petrochemical industries, organic chemistry labs, fuels, power stations, etc.

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

Accelerated Iron Corrosion Tester LB-10AIC

Accelerated Iron Corrosion Tester LB-10AIC

Accelerated iron corrosion tester LB-10AIC is a microcomputer controlled system with electric heating mode. The constant stirring in water and oil tank promotes temperature consistency throughout the process.

Specification

Temperature range	RT ~ 99.9 °C
Temperature accuracy	± 0.5 °C
Number of test samples	4
Stirring speed	1000 rpm ± 50 rpm
Ambient temperature	5 °C ~ 40 °C
Relative humidity	≤ 90 %
Power consumption	< 1200 W
Power supply	AC 220 V ± 10 % ; 50 Hz ± 5 %
Dimensions	450 × 350 × 500 mm
Weight	35 kgs

Features

Digital LCD color screen for visual monitoring
Electric heating mode
Rust resistance performance
Man-machine dialogue mode of operation for real linguistic communication
Stainless steel unit with insulated layer
Simultaneous analysis of four samples

Application

Used to test the inhibiting rust resistance performance of turbine oil, mineral oil, petrochemicals, etc. in the fields of chemical industries, paints, fuels, gasoline, natural gas, etc.

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021

Abrasion Tester

Abrasion Tester LB-10AAT

Abrasion Tester LB-10AAT

Abrasion tester LB-10AAT is an automated wearing and abrasion testing unit. It is accessible to mobile phones, PDA, MP3 players and portable computers. The precision transmission access ensures smooth functioning of the unit. Test fixtures are carried out using alcohol as a standard medium of testing.

Specification

Front counter	0 ~ 99999999 times
Back counter	0 ~ 60 times
Friction range	1 mm ~ 60 mm
Test medium	Alcohol, rubber, pencil
Dimensions	630 × 450 × 370 mm
Weight	21 kgs

Features

Digital LCD screen for visual monitoring of data
Hardness scratches test fixture
Eraser test fixture
Adjustable counter and friction range
Anti-corrosive stainless steel structure

Application

Used for testing the wearing and abrasive abilities of various products in chemical, plastics, petrochemical, paints, lubricants and other automotive equipment manufacturing industries.

By adminLab Equipment, LaboratoryComments Off

02MayMay 2, 2021