Oven
28Jun

Clean Oven

Clean Oven

Clean oven LB-100CLO

Clean oven LB-100CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 72 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 100 / Class 1000
Exterior dimensions ( W x H x D ) 900 x 1050 x 550 mm
Power supply AC 1 phase 220 V
Interior dimensions ( W x H x D ) 400 x 450 x 400 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-101CLO

Clean oven LB-101CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 72 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 10000
Exterior dimensions ( W x H x D ) 900 x 1050 x 550 mm
Power supply AC 1 phase 220 V
Interior dimensions ( W x H x D ) 400 x 450 x 400 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-10CLO

Clean oven LB-10CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 72 L
Temperature range RT 10 ℃ ~ 200 ℃
Dust class Class 100 / Class 1000
Exterior dimensions ( W x H x D ) 900 x 1050 x 550 mm
Power supply AC 1 phase 220 V
Interior dimensions ( W x H x D ) 400 x 450 x 400 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-11CLO

Clean oven LB-11CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 72 L
Temperature range RT 10 ℃ ~ 200 ℃
Dust class Class 10000
Exterior dimensions ( W x H x D ) 900 x 1050 x 550 mm
Power supply AC 1 phase 220 V
Interior dimensions ( W x H x D ) 400 x 450 x 400 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-200CLO

Clean oven LB-200CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 270 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 100 / Class 1000
Exterior dimensions ( W x H x D ) 1100 x 1600 x 650 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 600 x 900 x 500 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-201CLO

Clean oven LB-201CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 270 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 10000
Exterior dimensions ( W x H x D ) 1100 x 1600 x 650 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 600 x 900 x 500 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-20CLO

Clean oven LB-20CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 270 L
Temperature range RT 10 ℃ ~ 200 ℃
Dust class Class 100 / Class 1000
Exterior dimensions ( W x H x D ) 1100 x 1600 x 650 mm
Power supply AC 3 phase 220 V
Interior dimensions ( W x H x D ) 600 x 900 x 500 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-300CLO

Clean oven LB-300CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 480 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 100 / Class 1000
Exterior dimensions ( W x H x D ) 1300 x 1700 x 750 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 800 x 1000 x 600 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-301CLO

Clean oven LB-301CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 480 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 10000
Exterior dimensions ( W x H x D ) 1300 x 1700 x 750 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 800 x 1000 x 600 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-30CLO

Clean oven LB-30CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 480 L
Temperature range RT 10 ℃ ~ 200 ℃
Dust class Class 100 / Class 1000
Exterior dimensions ( W x H x D ) 1300 x 1700 x 750 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 800 x 1000 x 600 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-31CLO

Clean oven LB-31CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 480 L
Temperature range RT 10 ℃ ~ 200 ℃
Dust class Class 10000
Exterior dimensions ( W x H x D ) 1300 x 1700 x 750 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 800 x 1000 x 600 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-400CLO

Clean oven LB-400CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 600 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 100 / Class 1000
Exterior dimensions ( W x H x D ) 1500 x 1700 x 750 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 1000 x 1000 x 600 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-401CLO

Clean oven LB-401CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 600 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 10000
Exterior dimensions ( W x H x D ) 1500 x 1700 x 750 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 1000 x 1000 x 600 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece

Clean oven LB-401CLO

Clean oven LB-401CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.

Specification

Capacity 600 L
Temperature range RT 10 ℃ ~ 300 ℃
Dust class Class 10000
Exterior dimensions ( W x H x D ) 1500 x 1700 x 750 mm
Power supply AC 3 phase 380 V
Interior dimensions ( W x H x D ) 1000 x 1000 x 600 mm
Temperature fluctuation ± 0.3 °C
Temperature uniformity 1 °C
Load 20 kg per shelf
Door Single door

Explosion-proof lock

Silicone gaskets
Inner chamber material SUS#304
External chamber material Cold-rolled plate with powder coated finishing
Insulation Fiberglass wool
Controller Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control
Heater Oval electrical heating ceramic tile

Low radiation electrical heater
Air filter HEPA filter
Wind cycling system Motor with centrifugal fan for uniform wind
Air ventilation system Adjustable air throttle, directly connected with air exhaust duct
Surrounding temperature range 0 ℃ ~ 30 ℃
Surrounding relative humidity ≤ 85 % RH
Atmospheric pressure 0.086 MPa ~ 0.106 MPa
Ambient air requirements No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby
Prohibited items for the unit Flammable explosive volatile material sample test or storage

Corrosive substance sample test or store

Biological sample test or store

Strong electromagnetic emission source test or store

Features

  • Temperature controller
  • Digital set mode and display
  • PID controlled auto calculation
  • Single segmentation control
  • Solid state relay control ( SSR control )
  • Low radiated oval electrical heating tile
  • Adjustable air throttle ( directly connected to air exhaust duct )
  • Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
  • Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)

Standard Accessories

Accessory No Accessory Quantity
1. Electrical heater 1 piece
2. Non fuse switch 2 piece
3. 3 meter power cord 1 piece
4. Tray stand 2 piece
5. Timer 1 piece
By Lab Equipment, Laboratory, OvenComments Off
Read more...
28Jun

Blast Air Oven

Blast Air Oven

Blast air oven LB-10BAO

Blast air oven LB-10BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Vertical type
Interior dimension 300 x 300 x 270 mm
Shelves 2
Overall dimension 500 x 450 x 440 mm
Temperature range RT + 10 ~ 250 ° C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 220 V 50 Hz
Input power 500 W

Features

  • Digital temperature display
  • Argon – arc welding
  • Independent temperature limiting controller is optional
  • Recorder and printer are optional
  • Independent alarm system is optional

Application

Used in scientific & research applications in agricultural, biological and other research departments.

Blast air oven LB-11BAO

Blast air oven LB-11BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Vertical type
Interior dimension 420 x 350 x 350 mm
Shelves 2
Overall dimension 710 x 450 x 440 mm
Temperature range RT + 10 ~ 250 ° C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 220 V 50 Hz
Input power 750 W

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-12BAO

Blast air oven LB-12BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Vertical type
Interior dimension 550 x 350 x 350 mm
Shelves 2
Overall dimension 840 x 530 x 730 mm
Temperature range RT + 10 ~ 250 ° C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 220 V 50 Hz
Input power 1500 W

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-13BAO

Blast air oven LB-13BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Vertical type
Interior dimension 600 x 550 x 600 mm
Shelves 2
Overall dimension 890 x 730 x 780 mm
Temperature range RT + 10 ~ 250 ° C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 220 V 50 Hz
Input power 2000 W

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-14BAO

Blast air oven LB-14BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 340 x 320 x 320 mm
Shelves 2
Overall dimension 620 x 530 x 490 mm
Temperature range RT + 10 ~ 250 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 550 W
Input power 220 V 50 Hz

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-15BAO

Blast air oven LB-15BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 400 x 350 x 500 mm
Shelves 2
Overall dimension 600 x 550 x 755 mm
Temperature range RT + 10 ~ 250 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 1050 W
Input power 220 V 50 Hz

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-16BAO

Blast air oven LB-16BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 450 x 550 x 550 mm
Shelves 2
Overall dimension 600 x 710 x 845 mm
Temperature range RT + 10 ~ 250 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 1500 W
Input power 220 V 50 Hz

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-17BAO

Blast air oven LB-17BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 500 x 600 x 750 mm
Shelves 2
Overall dimension 650 x 7550 x 1045 mm
Temperature range RT + 10 ~ 250 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 2100 W
Input power 220 V 50 Hz

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-18BAO

Blast air oven LB-18BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 600 x 550 x 1300 mm
Shelves 3
Overall dimension 7450 x 750 x 1670 mm
Temperature range RT + 10 ~ 250 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 4000 W
Input power 380 V 50 Hz

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-19BAO

Blast air oven LB-19BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 800 x 600 x 1300 mm
Shelves 4
Overall dimension 945 x 800 x 1690 mm
Temperature range RT + 10 ~ 250 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 4500 W
Input power 380 V 50 Hz

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-20BAO

Blast air oven LB-20BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 1000 x 600 x 1600 mm
Shelves 5
Overall dimension 1140 x 600 x 2150 mm
Temperature range RT + 10 ~ 250 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 6000 W
Input power 380 V 50 Hz

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-30BAO

Blast air oven LB-30BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 400 x 350 x 500 mm
Shelves 2
Overall dimension 600 x 550 x 755 mm
Temperature range RT + 10 ~ 300 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 220 V 50 Hz
Input power 1240 W

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-31BAO

Blast air oven LB-31BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 450 x 550 x 550 mm
Shelves 2
Overall dimension 650 x 755 x 1045 mm
Temperature range RT + 10 ~ 300 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 220 V 50 Hz
Input power 1740 W

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-32BAO

Blast air oven LB-32BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 500 x 600 x 750 mm
Shelves 2
Overall dimension 650 x 755 x 1045 mm
Temperature range RT + 10 ~ 300 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 220 V 50 Hz
Input power 2500 W

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-33BAO

Blast air oven LB-33BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 600 x 550 x 1300 mm
Shelves 3
Overall dimension 745 x 750 x 1670 mm
Temperature range RT + 10 ~ 300 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 220 V 50 Hz
Input power 4500 W

Features

  • Digital LCD screen for visual monitoring of data
  • Multiple positioning on shelves
  • Temperature regulation
  • PID controlled system

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-34BAO

Blast air oven LB-34BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 800 x 600 x 1300 mm
Shelves 4
Overall dimension 945 x 800 x 1690 mm
Temperature range RT + 10 ~ 300 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 380 V 50 Hz
Input power 4800 W

Features

  • Digital temperature display
  • Argon – arc welding
  • Independent temperature limiting controller is optional
  • Recorder and printer are optional
  • Independent alarm system is optional

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-35BAO

Blast air oven LB-35BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 800 x 800 x 1000 mm
Shelves 4
Overall dimension 980 x 1030 x 1310 mm
Temperature range RT + 10 ~ 300 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 380 V 50 Hz
Input power 5000 W

Features

  • Digital temperature display
  • Argon – arc welding
  • Independent temperature limiting controller is optional
  • Recorder and printer are optional
  • Independent alarm system is optional

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

Blast air oven LB-36BAO

Blast air oven LB-36BAO is a microprocessor PID temperature controlled steel unit. Hot air circulating systems consist of a fan, used under a high temperature. Proper air ducts ensure a uniform distribution of temperature in the chamber.

Specification

Type Desk type
Interior dimension 1000 x 600 x 1600 mm
Shelves 5
Overall dimension 1140 x 800 x 2150 mm
Temperature range RT + 10 ~ 300 ° C
Ambient temperature + 5 ~ 40 °C
Temperature stability ± 0.5 ° C
Temperature control 0.1 °C
Timer range 1 min to 9999 min
Voltage 380 V 50 Hz
Input power 6500 W

Features

  • Digital temperature display
  • Argon – arc welding
  • Independent temperature limiting controller is optional
  • Recorder and printer are optional
  • Independent alarm system is optional

Application

Used for drying, baking, wax melting, disinfection and sterilization in biochemical, chemical, pharmaceutical, medical units, industrial and mining enterprises, colleges and universities, scientific research, etc.

By Lab Equipment, Laboratory, OvenComments Off
Read more...

    Product Query

    Feel free to ask for details, don't save any questions!