Lab Equipment
03May

Automatic Biochemistry Analyzer LB-10ABA

Automatic Biochemistry Analyzer LB-10ABA

Automatic Biochemistry Analyzer LB-10ABA

Automatic biochemistry analyzer LB-10ABA is a unit with advanced, highly sensitive test technology. Features high accuracy diluter, advanced seal and connecting technology to provide accurate sampling. Two separate reagent chambers with independent refrigerators. Internal and external Nano treated probe effectively reduce probe residual and carry over

Specification

Throughput-includes ISE 960 test/ hr.
Throughput-includes biochemical test only 800 test/ hr.
Sample capacity 2 x 100 primary tube or micro serum cup
Sample volume 1.0 µL to 100 µL in .01 µL/ step
Reagent volume 1 µL to 500 µL in 0.1/ step
Reagent tray 2 reagent strays, barcode scanner available (on request)
Reagent refrigerator 2 °C to 8 °C, 24 hrs. available
Reading cuvette 160 cuvettes
Reaction volume Minimum 120 µL
Reaction disc temperature 37 °C ± 0.1 °C
Carry- over Less than 0.0005%
Wavelength range 340 nm to 810 nm
Power supply AC 110 V / 60 Hz

220 V / 50 Hz
Dimensions 1200 x 900 x 1100 mm

Features

  • Smart warning and easy to correct function
  • Levey Jennings quality control program at multi-level
  • Reaction curve displaying on line and storing helps results analysis
  • Methods - Endpoint, kinetic (rate), fixed time, single standard, multi-standard, single wavelength assay, biochromatic, bi-reagent assay, serum blank assay, immunoturbidimetry assay and ISE assay (K/Na/Ca/ Cl/ PH)
  • Multi report formats and user-self-defined report format is available
  • Powerful software for calculating, banking, multi-analysis, data reviewing, QC and results management
  • Automatic alarm function
  • ISE module (Optional)
  • In ISE module, test various ion items with accurate results
  • Quartz glass cuvette available on request

Application

Used for the analysis of various biological components in fields such as pathology, medical microbiology, and research purposes.

By Lab Equipment, LaboratoryComments Off
Read more...
03May

Automated Solid Phase Extraction System LB-10SPX

Automated Solid Phase Extraction System LB-10SPX

Automated Solid Phase Extraction System LB-10SPX

Automated solid phase extraction system LB-10SPX is a unit designed to process more than 24 large volume water samples. Four individual channels can handle four samples simultaneously to improve the efficiency.

Specification

Working temperature 5 °C to 40 °C
Working humidity 15 % to 10 % RH
Separated solvents 8 to 11
Parallel sample unit 1 to 4
Sample rack 108, 80 , 48 , 24 , 12
Power 220 V to 240 V, 50 Hz, 5A
Dimensions 650 x 810 x 680 mm
Weight 70 kgs

Features

  • The ceramic spool of the multi position valve prevents liquid leakage and corrosion
  • Accessing up to 8 solvents at one time offers more choice and more convenience
  • The probe wash station combines rinsing of the outer wall and inner wall
  • The waste can be collected separately by a waste segregated collection system
  • High precision dual helix screw drive robot arm
  • Liquid level tracking system

Application

Used to analyze pesticide residues, veterinary residues, food additives, drugs and forensic medicine.

By Lab Equipment, LaboratoryComments Off
Read more...
03May

Automated Immunohistochemistry Stainer LB-10IHCS

Automated Immunohistochemistry Stainer LB-10IHCS

Automated Immunohistochemistry Stainer LB-10IHCS

Automated Immunohistochemistry Stainer LB-10IHCS is a computerized unit with 2-D scan code. The real time reagent volume calculation promotes easy management of required reagent and reduces wastage. It activates an automatic cleaning function on completion of all recorded staining. The excellent expansibility promotes a wide range of staining protocol applications

Specification

Capacity 48 slides
Number of reagent containers 64 reagents ( 5 mL for each )
Heating module 99 °C
Reagent increments 50 µL

75 µL

100 µL

150 µL

200 µL

250 µL
Power consumption ≤ 950 W
Power supply 220 V ± 10 %; 50 Hz / 60 Hz

110 V ± 10 %; 50 Hz / 60 Hz
Dimensions 1015 × 665 × 520 mm
Weight 131 kgs

Features

  • Efficient bulk labelling input program
  • Independent heating and monitoring modules for thermostatic experiments
  • Advanced evaporation proofing by optimized solvent membrane cover
  • Significant low dispensing feature for reduced wastage of reagents
  • Optimized program for simultaneous moving, dispensing and rapid turnaround of slides
  • Real time monitoring and data recording for efficient detail tracking of staining task
  • Convenient data output by printing function
  • Teflon coated nozzle avoids staining contamination

Application

Used for staining specimens in paraffin section, frozen section, punctured section, cell smear and marrow section in the fields of histology, cytology, immunology, microbiology, medicines, genetics, etc.

By Lab Equipment, LaboratoryComments Off
Read more...
03May

Automated Blood Culture System LB-13ABC

Automated Blood Culture System LB-13ABC

Automated Blood Culture System LB-13ABC

Automated blood culture system LB-13ABC is a fully automated non-invasive microbial culture and detection equipment. Inbuilt optical detection algorithm tracks the intensity of florescence periodically. Programmed algorithm accurately determines microbial growth in accordance with fluorescence intensity. Control module combines an efficient user interface and organized data management for consistent workflow efficiency.

Specification

Cell capacity 240
TTP (Time to positivity) > 90 % within 24 hours
Inoculation Swing shaking
Incubation temperature 35 °C ± 1.5 °C
Blood sampling Quantitative vacuum
Specimen type Blood and all other sterile body fluids
Blood culture bottle PET
Display Graphical user interface
Dimensions 780 × 650 × 980 mm
Power supply 220 V / 50 Hz

110 V / 60 Hz
Weight 270 kgs

Features

  • Operation system
  • Homogeneous optical reinforced detection technology
  • Real time dynamic display of the cultural status and growth curve
  • Continuous detection of the bottles within 10 minutes
  • Double-barcode scan for traceable loading/unloading of culture bottles
  • Addition of resin assures great capability of antibiotic neutralization
  • Quantitative vacuum based blood collection
  • Automated optical detection for positive bottles
  • Automated recognition and indicative alarms for irregular loading
  • Favorable nutritional media for microbial growth

Application

Used in diagnostic laboratories, clinical pathology and research laboratories for detection and identification of blood borne bacterial and fungal pathogens from body fluids in the sample.

Optional Accessories

Item No. Item Name Qty
BEB-10 Culture medium bottle (25 ml) 50
By Lab Equipment, LaboratoryComments Off
Read more...
03May

Automated Blood Culture System LB-12ABC

Automated Blood Culture System LB-12ABC

Automated Blood Culture System LB-12ABC

Automated blood culture system LB-12ABC is a fully automated non-invasive microbial culture and detection equipment. Inbuilt optical detection algorithm tracks the intensity of florescence periodically. Programmed algorithm accurately determines microbial growth in accordance with fluorescence intensity. Control module combines an efficient user interface and organized data management for consistent workflow efficiency.

Specification

Cell capacity 120
TTP (Time to positivity) > 90 % within 24 hours
Inoculation Swing shaking
Incubation temperature 35 °C ± 1.5 °C
Blood sampling Quantitative vacuum
Specimen type Blood and all other sterile body fluids
Blood culture bottle PET
Display Graphical user interface
Dimensions 680 × 610 × 910 mm
Power supply 220 V / 50 Hz

110 V / 60 Hz
Weight 137 kgs

Features

  • Operation system
  • Homogeneous optical reinforced detection technology
  • Real time dynamic display of the cultural status and growth curve
  • Continuous detection of the bottles within 10 minutes
  • Double-barcode scan for traceable loading/unloading of culture bottles
  • Addition of resin assures great capability of antibiotic neutralization
  • Quantitative vacuum based blood collection
  • Automated optical detection for positive bottles
  • Automated recognition and indicative alarms for irregular loading
  • Favorable nutritional media for microbial growth

Application

Used in diagnostic laboratories, clinical pathology and research laboratories for detection and identification of blood borne bacterial and fungal pathogens from body fluids in the sample

Optional Accessories

Item No. Item Name Qty
BEB-10 Culture medium bottle (25 ml) 50
By Lab Equipment, LaboratoryComments Off
Read more...
03May

Automated Blood Culture System LB-10ABC

Automated Blood Culture System LB-10ABC

Automated Blood Culture System LB-10ABC

Automated blood culture system LB-10ABC is a fully automated non-invasive microbial culture and detection equipment. Inbuilt optical detection algorithm tracks the intensity of florescence periodically. Programmed algorithm accurately determines microbial growth in accordance with fluorescence intensity. Control module combines an efficient user interface and organized data management for consistent workflow efficiency.

Specification

Cell capacity 50
TTP (Time to positivity) > 90 % within 24 hours
Inoculation Rotary shaking
Incubation temperature 35 °C ± 1.5 °C
Blood sampling Quantitative vacuum
Specimen type Blood and all other sterile body fluids
Blood culture bottle PET
Display Graphical user interface
Dimensions 640 × 660 × 650 mm
Power supply 220 V / 50 Hz

110 V / 60 Hz
Weight 122 kgs

Features

  • Operation system
  • Homogeneous optical reinforced detection technology
  • Real time dynamic display of the cultural status and growth curve
  • Continuous detection of the bottles within 10 minutes
  • Double-barcode scan for traceable loading/unloading of culture bottles
  • Addition of resin assures great capability of antibiotic neutralization
  • Quantitative vacuum based blood collection
  • Automated optical detection for positive bottles
  • Automated recognition and indicative alarms for irregular loading
  • Favorable nutritional media for microbial growth

Application

Used in diagnostic laboratories, clinical pathology and research laboratories for detection and identification of blood borne bacterial and fungal pathogens from body fluids in the sample.

Optional Accessories

Item No. Item Name Qty
BEB-10 Culture medium bottle (25 ml)
By Lab Equipment, LaboratoryComments Off
Read more...
02May

Auto-Ignition Point Tester LB-10AIP

Auto-Ignition Point Tester LB-10AIP

Auto-Ignition Point Tester LB-10AIP

Auto-ignition point tester LB-10AIP is a microprocessor controlled unit. It is characterized with Al artificial intelligence algorithm for temperature control. The spontaneous ignition enables point testing of nonflammable fuels.

Specification

Temperature range RT ~ 800 °C
Temperature accuracy ≤ 1 °C
Conical flask capacity 200 mL
Generator turbine speed > 30 MW
Ambient temperature RT ~ 50 °C
Relative humidity < 80 %
Power consumption < 2000 W
Power supply AC 220 V ± 10 %; 50 Hz
Dimensions 680 × 520 × 500 mm
Weight 40 kgs

Features

  • Digital LCD screen enables visual monitoring of delivered data
  • Intelligent temperature regulation and control technology
  • Temperature stability throughout the chamber

Application

Used in determining the ignition point of nonflammable oils like lubricants, thermic fluids, hydraulic fluids, etc.

By Lab Equipment, LaboratoryComments Off
Read more...
02May

Ash Content Tester LB-10ACT

Ash Content Tester LB-10ACT

Ash Content Tester LB-10ACT

Ash content tester LB-10ACT is a microprocessor-controlled unit with thermocouple temperature control element. Conforming to ASTM D482 Standard Test Method, it is characterized with box-type resistance furnace and electric hot plates as a heating source.

Specification

Temperature range RT ~ 1000 °C
Air furnace heating time ≤ 60 min
Temperature uniformity ≤ 15 °C
Temperature control 775 °C ± 25 °C
Heating power 2500 W
Power supply AC 220 V ± 10 %; 50 Hz
Heating chamber dimensions 200 × 120 × 80 mm
Dimensions 750 X 550 X 650 mm
Weight 45 kgs

Features

  • Digital LED screen for visual monitoring of set data
  • Highly proficient refractories and heater parts
  • Digital temperature controller
  • Instant heating
  • Cast iron top heating plate
  • Stainless steel tank shell

Application

Used in determining the ash content in petroleum products in the fields of natural gasoline, crude oil extraction, petrochemicals, power stations, etc.

By Lab Equipment, LaboratoryComments Off
Read more...
02May

Aniline Point Tester LB-10APT

Aniline Point Tester LB-10APT

Aniline Point Tester LB-10APT

Aniline point tester LB-10APT is a microprocessor-controlled unit designed under the ASTM D611 Standard. It is characterized by electric stirring for maintaining temperature equilibrium throughout the sample. The front panel consists of knobs for temperature and speed regulation.

Specification

Temperature range RT ~ 200 °C
Temperature accuracy ≤ ± 0.5 °C
Heating power 800 W
Motor power 6 W
Power supply AC 220 V; 50 Hz
Dimensions 380 × 350 × 480 mm
Weight 35 kgs

Features

  • Analogue display for visually assessing the set data
  • Electronic stirring for speed regulation
  • Automatic end point detection
  • Manual temperature control
  • Transparent cylinder for visual monitoring of the analyzing process

Application

Used in determining the aniline point of petroleum products and hydrocarbon solvents in the fields of petrochemicals, organic chemical industries, solvents, power stations, etc.

By Lab Equipment, LaboratoryComments Off
Read more...
02May

XRF Alloy Analyzer LB-66AL

XRF Alloy Analyzer LB-66AL

XRF Alloy Analyzer LB-66AL

XRF alloy analyzer LB-66AL is a handheld analyzer designed for analysis of the elemental composition of alloys. It determines the chemistry of a sample by measuring the fluorescent X-rays emitted when excited by a primary-ray source. The built-in library of 380 alloy types facilitates analysis of a wide range of alloy materials. Configured with SDD detector enabling high accuracy elemental analysis.

Specification

Detector SDD detector
Detection range ( ppm ) Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Sn, Sb, Hf, Ta, W, Re, Pb and Bi
Excitation source ( standard ) 50 kV / 200 µA Ag target
Operating temperature ( -20 °C to 50 °C )
Operating humidity ≤ 90 %
Pipe flow pressure Adjustable
Digital pulse processor 80 MHz ADC digital pulse processor
Heat dissipation system T-shaped radiator
Display panel 4.3 inch industrial resistive touch screen
Display brightness Automated adjustment
Memory capacity 32 GB
Data storage 32 GB, 300,000 spectral data
Battery life 8 hours
Dimensions ( W x H x D ) 79 x 280 x 254 mm
Weight ( with battery ) 1.6 kgs

Features

  • Non-destructive, rapid analysis of alloy elements
  • On site alloy grade identification
  • Built-in double beam technology for auto detection of sample front
  • Wide range alloy analysis ( 30 standard elements )
  • Analysis of small diameter samples ( ppm range )
  • Detection of high temperature alloys ( molybdenum tungsten alloys )
  • Real-time battery monitoring ( M-bus battery )
  • 50 kV / 200 µA Au, W, Rh target excitation source ( optional )
  • USB, Bluetooth and WiFi compatible
  • Data exportable to EXCEL or PDF format

Application

Used in petrochemical industry, thermal power plant, nuclear power plant, hydroelectric power plant, metals and mining industries for alloy grade identification and analysis

By Lab Equipment, LaboratoryComments Off
Read more...
02May

XRF Alloy Analyzer LB-65AL

XRF Alloy Analyzer LB-65AL

XRF Alloy Analyzer LB-65AL

XRF alloy analyzer LB-65AL is a handheld analyzer designed for analysis of the elemental composition of alloys. It determines the chemistry of a sample by measuring the fluorescent X-rays emitted when excited by a primary-ray source. The built-in library of 380 alloy types facilitates analysis of a wide range of alloy materials. Configured with BOOST Si-pin detector enabling high accuracy elemental analysis.

Specification

Detector BOOST Si-pin detector
Detection range ( ppm ) Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Sn, Sb, Hf, Ta, W, Re, Pb and Bi
Excitation source ( standard ) 50 kV / 200 µA Ag target
Operating temperature ( -20 °C to 50 °C )
Operating humidity ≤ 90 %
Pipe flow pressure Adjustable
Digital pulse processor 80 MHz ADC digital pulse processor
Heat dissipation system T-shaped radiator
Display panel 4.3 inch industrial resistive touch screen
Display brightness Automated adjustment
Memory capacity 32 GB
Data storage 32 GB, 300,000 spectral data
Battery life 8 hours
Dimensions ( W x H x D ) 79 x 280 x 254 mm
Weight ( with battery ) 1.6 kgs

Features

  • Non-destructive, rapid analysis of alloy elements
  • On site alloy grade identification
  • Built-in double beam technology for auto detection of sample front
  • Wide range alloy analysis ( 25 standard elements )
  • Analysis of small diameter samples ( ppm range )
  • Detection of high temperature alloys ( molybdenum tungsten alloys )
  • Real-time battery monitoring ( M-bus battery )
  • 50 kV / 200 µA Au, W, Rh target excitation source ( optional )
  • USB, Bluetooth and WiFi compatible
  • Data exportable to EXCEL or PDF format

Application

Used in petrochemical industry, thermal power plant, nuclear power plant, hydroelectric power plant, metals and mining industries for alloy grade identification and analysis

By Lab Equipment, LaboratoryComments Off
Read more...
02May

SAS Duo Super 360 LB-20SAS

SAS Duo Super 360 LB-20SAS

SAS Duo Super 360 LB-20SAS

SAS duo super 360 LB-20SAS is a portable unit that allows testing of two different media in one cycle. Two sampling heads operate simultaneously decreasing the sampling time up to 70 %. LCD illuminated touch screen command panel displays continuous sampling parameters. It is used to capture microorganisms when environment contamination is too low and number of samples to be tested is too high.

Specification

Airflow rate 181 l / min
Sampling head Aluminium, stainless steel or plastic (certified ready to use)
Dimension 260 × 110 × 352 mm
Weight 2.2 kgs

Features

  • Data management of different implemented sampling programs
  • Data storage (non-modifiable excel format)
  • Infrared transfer of data to any remote PC
  • Easy control of the calibration system without opening the instrument
  • Reduces operators time by monitoring 1000L of air in less than 3 minutes
  • Avoids turbulence in unidirectional airflow
  • Prevents re-aspiration of sampled air
  • Allows testing of two different media in one sampling cycle
  • Monitors 360 l / min of air in cleanrooms
  • Provides quick and consistent results

Application

Used for controlling and validating biotechnology and microbiology laboratories, clinics, hospitals, restricted access barriers (RABS), vaccine production plants, operating theatres, etc.

Optional Accessories

Accessory No. Accessories
SASB1 Battery charger with universal plug for both models (this is mandatory for the correct functioning of the instrument)
SASB2 Soft carrying case
SASB3 Aluminium carrying case
SASB4 SAS-Holder table and wall (stainless steel)
SASB5 Stainless steel floor tripod
SASB6 Adapter to convert contact plate model to accept 90 mm Petri dishes
SASB7 SAS stainless steel Petri head + aluminium adapter
SASB8 SAS aluminium Petri head + adapter
SASB9 IO OQ PQ manual
SASB10 Software for downloading data
SASB11 Interface for SAS software
SASB12 Infrared remote control
By Lab Equipment, LaboratoryComments Off
Read more...
02May

SAS Super Air Sampler LB-11SAS

SAS Super Air Sampler LB-11SAS

SAS Super Air Sampler LB-11SAS

SAS super air sampler LB-11SAS is a portable unit with eight pre-fixed sampling configuration. It allows continuous or sequential sampling from few minutes to several hours. LCD illuminated touch screen command panel displays continuous sampling parameters. It is used for inspecting the indoor environment by capturing the microorganisms present in the air.

Specification

Airflow rate 180 l / min
Sampling time 6 mins (1000 L)
Maximum sampling quantity 70000 L
Battery life 40000 l
Power 8.4 V ⁓ 2.7 A h
Dimension 120 × 125 × 275 mm
Weight 1.8 kgs

Features

  • Data management of different implemented sampling programs
  • Data storage (non-modifiable excel format)
  • Infrared transfer of data to any remote PC
  • Maximum storage up to 300 sampling cycles
  • Avoids turbulence in unidirectional airflow
  • Prevents re-aspiration of sampled air
  • Speed sensors accurately maintain sampling rate
  • Automatic signals indication (expired calibration)
  • Choice of sampling head (Aluminium / stainless steel / plastic)
  • Pyramid shaped body for stability

Application

Used for controlling and validating biotechnology and microbiology laboratories, clinics, hospitals, restricted access barriers (RABS), vaccine production plants, operating theatres, etc.

Optional Accessories

Accessory No. Accessories
SASA1 Battery charger with universal plug for both models (this is mandatory for the correct functioning of the instrument)
SASA2 Soft carrying case
SASA3 Bio-Transport autoclavable carrying case
SASA4 Handle for Bio-Transport carrying case
SASA5 Aluminium carrying case
SASA6 SAS-Holder table and wall (stainless steel)
SASA7 Stainless steel floor tripod
SASA8 Adapter to convert contact plate model to accept 90 mm Petri dishes
SASA9 SAS stainless steel Petri head + aluminium adapter
SASA10 SAS aluminium Petri head + adapter
SASA11 IO OQ PQ manual
SASA12 Software for downloading data
SASA13 Interface for SAS software
SASA14 Infrared remote control
By Lab Equipment, LaboratoryComments Off
Read more...
02May

Air Release Value Tester LB-11ARV

Air Release Value Tester LB-11ARV

Air Release Value Tester LB-11ARV

Air release value tester LB-11ARV is a compact unit, with automatic air flow control equipment. Microprocessor based control system, calculates the target density of test sample for measuring air release value. The unit conforms to ASTM D3427 standard test method for air release properties of petroleum oils.

Specification

Temperature range Ambient ~ 100 °C
Circulating mode Pump circulation
Accuracy ± 0.1 °C
Senor pt100 (platinum resistor)
Compliance ASTM D3427
Ambient temperature 10 °C ~ 40 °C
Ambient humidity ≤ 85 %
Power 600 W
Voltage AC 220 V ±, 50 Hz

Features

  • Large pressure gauge dial (easy reading)
  • Test timer for aeration timing
  • Automatic function of aeration direction switch
  • Built-in air heater (safe and rapid)

Application

Used to test the ability of a turbine, hydraulic, and gear oils to separate entrained air in petroleum, oil, chemical industries for analysis, classification and safety regulations

By Lab Equipment, LaboratoryComments Off
Read more...
02May

SAS Super Air Sampler LB-10SAS

SAS Super Air Sampler LB-10SAS

SAS Super Air Sampler LB-10SAS

SAS super air sampler LB-10SAS is a portable unit with eight pre-fixed sampling configuration. It allows continuous or sequential sampling from few minutes to several hours. LCD illuminated touch screen command panel displays continuous sampling parameters. It is used for inspecting the indoor environment by capturing the microorganisms present in the air.

Specification

Airflow rate 100 l / min
Sampling time 10 mins (1000 L)
Maximum sampling quantity 70000 L
Battery life 70000 l
Power 8.4 V ⁓ 2.7 A h
Dimension 120 × 125 × 275 mm
Weight 1.8 kgs

Features

  • Data management of different implemented sampling programs
  • Data storage (non-modifiable excel format)
  • Infrared transfer of data to any remote PC
  • Maximum storage up to 300 sampling cycles
  • Avoids turbulence in unidirectional airflow
  • Prevents re-aspiration of sampled air
  • Speed sensors accurately maintain sampling rate
  • Automatic signals indication (expired calibration)
  • Choice of sampling head (Aluminium / stainless steel / plastic)
  • Pyramid shaped body for stability

Application

Used for controlling and validating biotechnology and microbiology laboratories, clinics, hospitals, restricted access barriers (RABS), vaccine production plants, operating theatres, etc.

Optional Accessories

Accessory No. Accessories
SASA1 Battery charger with universal plug for both models (this is mandatory for the correct functioning of the instrument)
SASA2 Soft carrying case
SASA3 Bio-Transport autoclavable carrying case
SASA4 Handle for Bio-Transport carrying case
SASA5 Aluminium carrying case
SASA6 SAS-Holder table and wall (stainless steel)
SASA7 Stainless steel floor tripod
SASA8 Adapter to convert contact plate model to accept 90 mm Petri dishes
SASA9 SAS stainless steel Petri head + aluminium adapter
SASA10 SAS aluminium Petri head + adapter
SASA11 IO OQ PQ manual
SASA12 Software for downloading data
SASA13 Interface for SAS software
SASA14 Infrared remote control
By Lab Equipment, LaboratoryComments Off
Read more...

    Product Query

    Feel free to ask for details, don't save any questions!