Low temperature hydrogen peroxide plasma sterilizer LB-10LHPS
Low temperature hydrogen peroxide plasma sterilizer LB-10LHPS is a PLC controlled unit. Door can be handled manually. It provides multiple security functions such as alarm for temperature, voltage, pressure control and door finger protection function. 7-inch liquid crystal touch screen displays information regarding running status.
| Volume | 60 ml |
| Chamber size (L x W x H) | 610 x 350 x 320 mm |
| Outline dimension (L x W x H) | 720 x 630 x 1510 mm |
| Operating height | ≤ 1600 mm |
| Category | Class II medical devices |
| Sterilizing temperature | 50 ℃ ± 5 ℃ |
| Hydrogen peroxide sterilization concentration | 60 % |
| Sterilization time | 45 min ± 3 min |
| Sterilizing chamber material | #304 anticorrosive stainless steel or aluminium ( thickness ≥ 8 mm ) |
| Outer box material | Carbon steel baking powder and fiberglass |
| Material of electrode net | Aluminium alloy material 5052 ( thickness ≥ 2 mm) |
| Sealing door material | Aluminium alloy material 5052 ( thickness ≥ 15 mm ) |
| Main body insulation material | Rubber and plastic sponge ( ≥ 20 mm ) |
| Program system | Procedures: reinforcement cycle ( ≤ 50 minutes ) and fast loop( ≤ 30 minutes ) |
| U disk storage capacity | ≥ 8 G |
| Vacuum speed | 5 minutes / 50 pa |
| Air filtration accuracy | ≤ 0.2 μm |
| Heating mode | Electrical heating |
| Door opening mode | Manual |
| Door finger protection function | Right handed |
| Electromagnetic compatibility testing | Self – priming injection |
| Stop caster | Present |
| High temperature alarm system | Present |
| Voltage | Present |
| Power | AC 220 V / 50 Hz
AC 380 V / 50 Hz |
| Plasma power supply | 2.6 kW |
| Gross weight | ≤ 900 W |
- Liquid crystal touch screen (displays temperature, pressure, sterilization time, PLC circuit diagram, cycle mode, process phase, alarm information and provide actual interface photos)
- More humanized operation height (reduced to height of female personnel)
- High quality thermal conductive sterilizing chamber material
- Sterilizing chamber material ensures 100 % gaseous state hydrogen peroxide
- Large loading capacity
- Preheating time ≤ 30 minutes (increases rate of heating)
- Insulated main body (low thermal conductivity, fire resistance, anti-aging ability, environmental protection)
- Micro-printer print out every minute of data of the entire sterilization process (print records: program name, sterilization date, sterilizing pot number, sterilization start end time, sterilization process pressure and temperature change data, phase time and end state information)
- U disc stores records ≥ 100 ten thousand sterilization data (program sequence number, sterilization date, sterilizing pot number, beginning end time of sterilization, pressure, temperature, stage time and end state of sterilization process)
- Pressure sensor automatically detects and maintains pressure inside the cavity
- Temperature sensor automatically detects and maintains temperature inside the cavity
- Pumping control valve (controls evacuation with high vacuum flapper solenoid valve)
- Oil mist filter captures oil mist and pump back (reducing fuel consumption)
- Two meter to four meter sterilization effect
- Explosion-proof and flame-retardant heating system
- Multiple protective functions (overvoltage and over temperature protection, door finger protection function and errors displayed on LCD screen)
Used to sterilize the devices (mainly medical instruments) that are thermo labile or would be damaged by moisture of steam sterilization.
Low temperature hydrogen peroxide plasma sterilizer LB-11LHPS
Low temperature hydrogen peroxide plasma sterilizer LB-11LHPS is a PLC controlled unit. Door can be handled manually. It provides multiple security functions such as alarm for temperature, voltage, pressure control and door finger protection function. 7-inch liquid crystal touch screen displays information regarding running status.
| Volume | 100 ml |
| Chamber size (L x W x H) | 700 x 430 x 360 mm |
| Outline dimension (L x W x H) | 1000 x 800 x 1600 mm |
| Operating height | ≤ 1600 mm |
| Category | Class II medical devices |
| Sterilizing temperature | 50 ℃ ± 5 ℃ |
| Hydrogen peroxide sterilization concentration | 60 % |
| Sterilization time | 45 min ± 3 min |
| Sterilizing chamber material | #304 anticorrosive stainless steel or aluminium ( thickness ≥ 8 mm ) |
| Outer box material | Carbon steel baking powder and fiberglass |
| Material of electrode net | Aluminium alloy material 5052 ( thickness ≥ 2 mm) |
| Sealing door material | Aluminium alloy material 5052 ( thickness ≥ 15 mm ) |
| Main body insulation material | Rubber and plastic sponge ( ≥ 20 mm ) |
| Program system | Procedures: reinforcement cycle ( ≤ 50 minutes ) and fast loop( ≤ 30 minutes ) |
| U disk storage capacity | ≥ 8 G |
| Vacuum speed | 5 minutes / 50 pa |
| Air filtration accuracy | ≤ 0.2 μm |
| Heating mode | Electrical heating |
| Door opening mode | Manual |
| Door finger protection function | Right handed |
| Electromagnetic compatibility testing | Self – priming injection |
| Stop caster | Present |
| High temperature alarm system | Present |
| Voltage | Present |
| Power | AC 220 V / 50 Hz
AC 380 V / 50 Hz |
| Plasma power supply | 3.8 kW |
| Gross weight | ≤ 900 W |
- Liquid crystal touch screen (displays temperature, pressure, sterilization time, PLC circuit diagram, cycle mode, process phase, alarm information and provide actual interface photos)
- More humanized operation height (reduced to height of female personnel)
- High quality thermal conductive sterilizing chamber material
- Sterilizing chamber material ensures 100 % gaseous state hydrogen peroxide
- Large loading capacity
- Preheating time ≤ 30 minutes (increases rate of heating)
- Insulated main body (low thermal conductivity, fire resistance, anti-aging ability, environmental protection)
- Micro-printer print out every minute of data of the entire sterilization process (print records: program name, sterilization date, sterilizing pot number, sterilization start end time, sterilization process pressure and temperature change data, phase time and end state information)
- U disc stores records ≥ 100 ten thousand sterilization data (program sequence number, sterilization date, sterilizing pot number, beginning end time of sterilization, pressure, temperature, stage time and end state of sterilization process)
- Pressure sensor automatically detects and maintains pressure inside the cavity
- Temperature sensor automatically detects and maintains temperature inside the cavity
- Pumping control valve (controls evacuation with high vacuum flapper solenoid valve)
- Oil mist filter captures oil mist and pump back (reducing fuel consumption)
- Two meter to four meter sterilization effect
- Explosion-proof and flame-retardant heating system
- Multiple protective functions (overvoltage and over temperature protection, door finger protection function and errors displayed on LCD screen)
Used to sterilize the devices (mainly medical instruments) that are thermo labile or would be damaged by moisture of steam sterilization.
Low temperature hydrogen peroxide plasma sterilizer LB-12LHPS
Low temperature hydrogen peroxide plasma sterilizer LB-12LHPS is a PLC controlled unit. Door can be handled manually. It provides multiple security functions such as alarm for temperature, voltage, pressure control and door finger protection function. 7-inch liquid crystal touch screen displays information regarding running status.
| Volume | 130 ml |
| Chamber size (L x W x H) | 750 x 450 x 400 mm |
| Outline dimension (L x W x H) | 1040 x 800 x 1600 mm |
| Operating height | ≤ 1600 mm |
| Category | Class II medical devices |
| Sterilizing temperature | 50 ℃ ± 5 ℃ |
| Hydrogen peroxide sterilization concentration | 60 % |
| Sterilization time | 45 min ± 3 min |
| Sterilizing chamber material | #304 anticorrosive stainless steel or aluminium ( thickness ≥ 8 mm ) |
| Outer box material | Carbon steel baking powder and fiberglass |
| Material of electrode net | Aluminium alloy material 5052 ( thickness ≥ 2 mm) |
| Sealing door material | Aluminium alloy material 5052 ( thickness ≥ 15 mm ) |
| Main body insulation material | Rubber and plastic sponge ( ≥ 20 mm ) |
| Program system | Procedures: reinforcement cycle ( ≤ 50 minutes ) and fast loop( ≤ 30 minutes ) |
| U disk storage capacity | ≥ 8 G |
| Vacuum speed | 5 minutes / 50 pa |
| Air filtration accuracy | ≤ 0.2 μm |
| Heating mode | Electrical heating |
| Door opening mode | Manual |
| Door finger protection function | Right handed |
| Electromagnetic compatibility testing | Self – priming injection |
| Stop caster | Present |
| High temperature alarm system | Present |
| Voltage | Present |
| Power | AC 220 V / 50 Hz
AC 380 V / 50 Hz |
| Plasma power supply | 4.2 kW |
| Gross weight | ≤ 900 W |
- Liquid crystal touch screen (displays temperature, pressure, sterilization time, PLC circuit diagram, cycle mode, process phase, alarm information and provide actual interface photos)
- More humanized operation height (reduced to height of female personnel)
- High quality thermal conductive sterilizing chamber material
- Sterilizing chamber material ensures 100 % gaseous state hydrogen peroxide
- Large loading capacity
- Preheating time ≤ 30 minutes (increases rate of heating)
- Insulated main body (low thermal conductivity, fire resistance, anti-aging ability, environmental protection)
- Micro-printer print out every minute of data of the entire sterilization process (print records: program name, sterilization date, sterilizing pot number, sterilization start end time, sterilization process pressure and temperature change data, phase time and end state information)
- U disc stores records ≥ 100 ten thousand sterilization data (program sequence number, sterilization date, sterilizing pot number, beginning end time of sterilization, pressure, temperature, stage time and end state of sterilization process)
- Pressure sensor automatically detects and maintains pressure inside the cavity
- Temperature sensor automatically detects and maintains temperature inside the cavity
- Pumping control valve (controls evacuation with high vacuum flapper solenoid valve)
- Oil mist filter captures oil mist and pump back (reducing fuel consumption)
- Two meter to four meter sterilization effect
- Explosion-proof and flame-retardant heating system
- Multiple protective functions (overvoltage and over temperature protection, door finger protection function and errors displayed on LCD screen)
Used to sterilize the devices (mainly medical instruments) that are thermo labile or would be damaged by moisture of steam sterilization.
Low temperature hydrogen peroxide plasma sterilizer LB-13LHPS
Low temperature hydrogen peroxide plasma sterilizer LB-13LHPS is a PLC controlled unit. Door can be handled manually. It provides multiple security functions such as alarm for temperature, voltage, pressure control and door finger protection function. 7-inch liquid crystal touch screen displays information regarding running status.
| Volume | 190 ml |
| Chamber size (L x W x H) | 820 x 510 x 460 mm |
| Outline dimension (L x W x H) | 1120 x 830 x 1600 mm |
| Operating height | ≤ 1600 mm |
| Category | Class II medical devices |
| Sterilizing temperature | 50 ℃ ± 5 ℃ |
| Hydrogen peroxide sterilization concentration | 60 % |
| Sterilization time | 45 min ± 3 min |
| Sterilizing chamber material | #304 anticorrosive stainless steel or aluminium ( thickness ≥ 8 mm ) |
| Outer box material | Carbon steel baking powder and fiberglass |
| Material of electrode net | Aluminium alloy material 5052 ( thickness ≥ 2 mm) |
| Sealing door material | Aluminium alloy material 5052 ( thickness ≥ 15 mm ) |
| Main body insulation material | Rubber and plastic sponge ( ≥ 20 mm ) |
| Program system | Procedures: reinforcement cycle ( ≤ 50 minutes ) and fast loop( ≤ 30 minutes ) |
| U disk storage capacity | ≥ 8 G |
| Vacuum speed | 5 minutes / 50 pa |
| Air filtration accuracy | ≤ 0.2 μm |
| Heating mode | Electrical heating |
| Door opening mode | Manual |
| Door finger protection function | Right handed |
| Electromagnetic compatibility testing | Self – priming injection |
| Stop caster | Present |
| High temperature alarm system | Present |
| Voltage | Present |
| Power | AC 220 V / 50 Hz
AC 380 V / 50 Hz |
| Plasma power supply | 5.0 kW |
| Gross weight | ≤ 900 W |
- Liquid crystal touch screen (displays temperature, pressure, sterilization time, PLC circuit diagram, cycle mode, process phase, alarm information and provide actual interface photos)
- More humanized operation height (reduced to height of female personnel)
- High quality thermal conductive sterilizing chamber material
- Sterilizing chamber material ensures 100 % gaseous state hydrogen peroxide
- Large loading capacity
- Preheating time ≤ 30 minutes (increases rate of heating)
- Insulated main body (low thermal conductivity, fire resistance, anti-aging ability, environmental protection)
- Micro-printer print out every minute of data of the entire sterilization process (print records: program name, sterilization date, sterilizing pot number, sterilization start end time, sterilization process pressure and temperature change data, phase time and end state information)
- U disc stores records ≥ 100 ten thousand sterilization data (program sequence number, sterilization date, sterilizing pot number, beginning end time of sterilization, pressure, temperature, stage time and end state of sterilization process)
- Pressure sensor automatically detects and maintains pressure inside the cavity
- Temperature sensor automatically detects and maintains temperature inside the cavity
- Pumping control valve (controls evacuation with high vacuum flapper solenoid valve)
- Oil mist filter captures oil mist and pump back (reducing fuel consumption)
- Two meter to four meter sterilization effect
- Explosion-proof and flame-retardant heating system
- Multiple protective functions (overvoltage and over temperature protection, door finger protection function and errors displayed on LCD screen)
Used to sterilize the devices (mainly medical instruments) that are thermo labile or would be damaged by moisture of steam sterilization.
Low temperature hydrogen peroxide plasma sterilizer LB-20LHPS
Low temperature hydrogen peroxide plasma sterilizer LB-20LHPS is a PLC controlled unit. Door can be handled by automatic electrical opening for safety. Automatic electrical opening provides additional function of biological culture indicator. It provides multiple security functions such as alarm for temperature, voltage, pressure control and door finger protection function. 7-inch liquid crystal touch screen displays information regarding running status.
| Volume | 100 ml |
| Chamber size (L x W x H) | 700 x 430 x 360 mm |
| Outline dimension (L x W x H) | 1070 x 810 x 1600 mm |
| Operating height | ≤ 1600 mm |
| Category | Class II medical devices |
| Installation environment | 5 ℃ ~ 45 ℃ |
| Sterilizing temperature | 50 ℃ |
| Hydrogen peroxide sterilization concentration | 60 % |
| Sterilization time | 45 min ~ 50 min |
| Sterilizing chamber material | #304 anticorrosive stainless steel or aluminium ( thickness ≥ 8 mm ) |
| Outer box material | Carbon steel baking powder and fiberglass |
| Material of electrode net | Aluminium alloy material 5052 ( thickness ≥ 2 mm) |
| Sealing door material | Aluminium alloy material 5052 ( thickness ≥ 15 mm ) |
| Main body insulation material | Rubber and plastic sponge ( ≥ 20 mm ) |
| Program system | Procedures: reinforcement cycle ( ≤ 50 minutes ) and fast loop( ≤ 30 minutes ) |
| U disk storage capacity | ≥ 8 G |
| Maximum pressure resistance | 10 pa |
| Biological indicator culture | Present |
| Vacuum speed | 5 minutes / 50 pa |
| Air filtration accuracy | ≤ 0.2 μm |
| Heating mode | Electrical heating |
| Door opening mode | Electric push rod drive |
| Door finger protection function | Lifting type |
| Hydrogen peroxide injection mode | Door barrier switch function |
| Electromagnetic compatibility testing | Self – priming injection |
| Stop caster | Present |
| High temperature alarm system | Present |
| Voltage | Present |
| Power | AC 220 V / 50 Hz
AC 380 V / 50 Hz |
| Plasma power supply | 3.95 kW |
| Gross weight | ≤ 900 W |
- Liquid crystal touch screen (displays temperature, pressure, sterilization time, PLC circuit diagram, cycle mode, process phase, alarm information and provide actual interface photos)
- More humanized operation height (reduced to height of female personnel)
- High quality thermal conductive sterilizing chamber material
- Sterilizing chamber material ensures 100 % gaseous state hydrogen peroxide
- Large loading capacity
- Preheating time ≤ 30 minutes (increases rate of heating)
- Insulated main body (low thermal conductivity, fire resistance, anti-aging ability, environmental protection)
- Micro-printer print out every minute of data of the entire sterilization process (print records: program name, sterilization date, sterilizing pot number, sterilization start end time, sterilization process pressure and temperature change data, phase time and end state information)
- U disc stores records ≥ 100 ten thousand sterilization data (program sequence number, sterilization date, sterilizing pot number, beginning end time of sterilization, pressure, temperature, stage time and end state of sterilization process)
- Pressure sensor automatically detects and maintains pressure inside the cavity
- Temperature sensor automatically detects and maintains temperature inside the cavity
- Pumping control valve (controls evacuation with high vacuum flapper solenoid valve)
- Oil mist filter captures oil mist and pump back (reducing fuel consumption)
- Two meter to four meter sterilization effect
- Explosion-proof and flame-retardant heating system
- Multiple protective functions (overvoltage and over temperature protection, door finger protection function and errors displayed on LCD screen)
Used to sterilize the devices (mainly medical instruments) that are thermo labile or would be damaged by moisture of steam sterilization.
Low temperature hydrogen peroxide plasma sterilizer LB-21LHPS
Low temperature hydrogen peroxide plasma sterilizer LB-21LHPS is a PLC controlled unit. Door can be handled by automatic electrical opening for safety. Automatic electrical opening provides additional function of biological culture indicator. It provides multiple security functions such as alarm for temperature, voltage, pressure control and door finger protection function. 7-inch liquid crystal touch screen displays information regarding running status.
| Volume | 130 ml |
| Chamber size (L x W x H) | 750 x 450 x 400 mm |
| Outline dimension (L x W x H) | 1040 x 800 x 1780 mm |
| Operating height | ≤ 1600 mm |
| Category | Class II medical devices |
| Installation environment | 5 ℃ ~ 45 ℃ |
| Sterilizing temperature | 50 ℃ |
| Hydrogen peroxide sterilization concentration | 60 % |
| Sterilization time | 45 min ~ 50 min |
| Sterilizing chamber material | #304 anticorrosive stainless steel or aluminium ( thickness ≥ 8 mm ) |
| Outer box material | Carbon steel baking powder and fiberglass |
| Material of electrode net | Aluminium alloy material 5052 ( thickness ≥ 2 mm) |
| Sealing door material | Aluminium alloy material 5052 ( thickness ≥ 15 mm ) |
| Main body insulation material | Rubber and plastic sponge ( ≥ 20 mm ) |
| Program system | Procedures: reinforcement cycle ( ≤ 50 minutes ) and fast loop( ≤ 30 minutes ) |
| U disk storage capacity | ≥ 8 G |
| Maximum pressure resistance | 10 pa |
| Biological indicator culture | Present |
| Vacuum speed | 5 minutes / 50 pa |
| Air filtration accuracy | ≤ 0.2 μm |
| Heating mode | Electrical heating |
| Door opening mode | Electric push rod drive |
| Door finger protection function | Lifting type |
| Hydrogen peroxide injection mode | Door barrier switch function |
| Electromagnetic compatibility testing | Self – priming injection |
| Stop caster | Present |
| High temperature alarm system | Present |
| Voltage | Present |
| Power | AC 220 V / 50 Hz
AC 380 V / 50 Hz |
| Plasma power supply | 4.35 kW |
| Gross weight | ≤ 900 W |
- Liquid crystal touch screen (displays temperature, pressure, sterilization time, PLC circuit diagram, cycle mode, process phase, alarm information and provide actual interface photos)
- More humanized operation height (reduced to height of female personnel)
- High quality thermal conductive sterilizing chamber material
- Sterilizing chamber material ensures 100 % gaseous state hydrogen peroxide
- Large loading capacity
- Preheating time ≤ 30 minutes (increases rate of heating)
- Insulated main body (low thermal conductivity, fire resistance, anti-aging ability, environmental protection)
- Micro-printer print out every minute of data of the entire sterilization process (print records: program name, sterilization date, sterilizing pot number, sterilization start end time, sterilization process pressure and temperature change data, phase time and end state information)
- U disc stores records ≥ 100 ten thousand sterilization data (program sequence number, sterilization date, sterilizing pot number, beginning end time of sterilization, pressure, temperature, stage time and end state of sterilization process)
- Pressure sensor automatically detects and maintains pressure inside the cavity
- Temperature sensor automatically detects and maintains temperature inside the cavity
- Pumping control valve (controls evacuation with high vacuum flapper solenoid valve)
- Oil mist filter captures oil mist and pump back (reducing fuel consumption)
- Two meter to four meter sterilization effect
- Explosion-proof and flame-retardant heating system
- Multiple protective functions (overvoltage and over temperature protection, door finger protection function and errors displayed on LCD screen)
Used to sterilize the devices (mainly medical instruments) that are thermo labile or would be damaged by moisture of steam sterilization.
Low temperature hydrogen peroxide plasma sterilizer LB-22LHPS
Low temperature hydrogen peroxide plasma sterilizer LB-22LHPS is a PLC controlled unit. Door can be handled by automatic electrical opening for safety. Automatic electrical opening provides additional function of biological culture indicator. It provides multiple security functions such as alarm for temperature, voltage, pressure control and door finger protection function. 7-inch liquid crystal touch screen displays information regarding running status.
| Volume | 190 ml |
| Chamber size (L x W x H) | 820 x 510 x 460 mm |
| Outline dimension (L x W x H) | 1070 x 810 x 1780 mm |
| Operating height | ≤ 1600 mm |
| Category | Class II medical devices |
| Installation environment | 5 ℃ ~ 45 ℃ |
| Sterilizing temperature | 50 ℃ |
| Hydrogen peroxide sterilization concentration | 60 % |
| Sterilization time | 45 min ~ 50 min |
| Sterilizing chamber material | #304 anticorrosive stainless steel or aluminium ( thickness ≥ 8 mm ) |
| Outer box material | Carbon steel baking powder and fiberglass |
| Material of electrode net | Aluminium alloy material 5052 ( thickness ≥ 2 mm) |
| Sealing door material | Aluminium alloy material 5052 ( thickness ≥ 15 mm ) |
| Main body insulation material | Rubber and plastic sponge ( ≥ 20 mm ) |
| Program system | Procedures: reinforcement cycle ( ≤ 50 minutes ) and fast loop( ≤ 30 minutes ) |
| U disk storage capacity | ≥ 8 G |
| Maximum pressure resistance | 10 pa |
| Biological indicator culture | Present |
| Vacuum speed | 5 minutes / 50 pa |
| Air filtration accuracy | ≤ 0.2 μm |
| Heating mode | Electrical heating |
| Door opening mode | Electric push rod drive |
| Door finger protection function | Lifting type |
| Hydrogen peroxide injection mode | Door barrier switch function |
| Electromagnetic compatibility testing | Self – priming injection |
| Stop caster | Present |
| High temperature alarm system | Present |
| Voltage | Present |
| Power | AC 220 V / 50 Hz
AC 380 V / 50 Hz |
| Plasma power supply | 5.15 kW |
| Gross weight | ≤ 900 W |
- Liquid crystal touch screen (displays temperature, pressure, sterilization time, PLC circuit diagram, cycle mode, process phase, alarm information and provide actual interface photos)
- More humanized operation height (reduced to height of female personnel)
- High quality thermal conductive sterilizing chamber material
- Sterilizing chamber material ensures 100 % gaseous state hydrogen peroxide
- Large loading capacity
- Preheating time ≤ 30 minutes (increases rate of heating)
- Insulated main body (low thermal conductivity, fire resistance, anti-aging ability, environmental protection)
- Micro-printer print out every minute of data of the entire sterilization process (print records: program name, sterilization date, sterilizing pot number, sterilization start end time, sterilization process pressure and temperature change data, phase time and end state information)
- U disc stores records ≥ 100 ten thousand sterilization data (program sequence number, sterilization date, sterilizing pot number, beginning end time of sterilization, pressure, temperature, stage time and end state of sterilization process)
- Pressure sensor automatically detects and maintains pressure inside the cavity
- Temperature sensor automatically detects and maintains temperature inside the cavity
- Pumping control valve (controls evacuation with high vacuum flapper solenoid valve)
- Oil mist filter captures oil mist and pump back (reducing fuel consumption)
- Two meter to four meter sterilization effect
- Explosion-proof and flame-retardant heating system
- Multiple protective functions (overvoltage and over temperature protection, door finger protection function and errors displayed on LCD screen)
Used to sterilize the devices (mainly medical instruments) that are thermo labile or would be damaged by moisture of steam sterilization.